Chrome Spray Paint 90% Steelchrome

Aerosol chrome paint, 90% mirror effect on any surface that has been previously prepared. STEELCHROME is the most realistic chrome effect finish in spray format. To achieve a correct result, a specific application process must be followed. Instructions for use below.

Content: 400ml
Yield: 1m2
Brand: Custom Creative

More details

SP-STCHR
New product

14,88 €

- +

 
More info

Spray chrome paint 90% Steelchrome

Are you looking for a chrome effect finish, similar to polished or anodized aluminum? Then the STEELCHROME chrome paint is the right product for you. New formulation, more effective, more resistant, faster to apply, better mirror effect.

The STEELCHROME chrome effect is applied after a certain process. Special attention should be paid to the preparation phase, as this is crucial for achieving the most realistic chrome effect possible.


Application notes Steelchrome Spray:

The previous preparation of the piece to be chromed is important. Apply primer, filler, etc. if necessary and a glossy clear. Very important that you use a 2K clearcoat as a maximum grade of gloss, hardness and maximum resistance to the chrome‘s solvents are necessary for a correct result. 

Application process Steelchrome

1. Apply a glossy 2K clear over a dark or black base. The best clear for this is the Thunder clear of extra fast drying. Allow to dry for at least 24 hours, 72 hours in case you use a different clear. Or use the oven, if available, at 60°C for 2 hours. Then let it cool off.

2. Shake well the STEELCHROME spray for 1-2 minutes. Apply the paint intermittently. The evaporation is direct and shows immediately the chrome effect. Apply the paint without overcharging it until a a uniform chrome on the whole surface is achieved. Let it dry for 24 hours or 2 hours at 60°C in the oven.

3. When STEELCHROME is used for decorative purposes, the finish without applying a topcoat shows a medium resistance. It could be removed by continous abrasion or by applying chemical cleaning products, the mirror effect is higher though. If a higher resitance is required the H2O topcoat spray Fixchrome GH should be applied. This special topcoat reduces the mirror effect by 5-10%, but conferes weather and abrasion resistance. 


If a coloured chrome effect is desired, a candy clearcoat (with spray or spray gun) must be used after the H2O topcoat spray Fixchrome GH.


Content: 400 ml (mixture of propellants and paint)
Yield: 1m2
Brand: Custom Creative

Customers who bought this product also bought:

5 other products in the same category:

No products

To be determined Shipping
0,00 € Tax
0,00 € Total

Check out