Metal Flakes (3oz) - CUSTOM CREATIVE

Flakes by Custom Creative - 3oz

Custom Creative‘s flakes made of polyester are suitable for any kind of work: custom, automotive work, decoration, airbrushing and more.

Due to its incredible amount of sparkles only a number of reduced coats is needed in order to achieve the same effect.

Mostly mixed with clear coats or transparent resins.

Recommendations for flake‘s use:

1) Mix flakes with resin (bilayer) or clear coat in a proportion of 28gr (1oz) per liter before diluting. The proportion can be higher or less, depending on the desired intensity of the effect
2) Apply flakes over a black base. They can also be applied over bases of the same colour as the flake.  
3) Apply with a tip size of: 1.3mm - 1.5mm
4) Apply 2-3 layers or more, depending on the desired effect. Later apply 2 layers more of the clear coat without flakes in order to level the surface.

Different colours: 14 references
Size: 008 - Contact us for further flakes sizes
Cans of: 85gr (3oz) -  enough for a blend with 3L of clear/resin