Topcoat CR2 for Steelchrome

Clear coat especially developed for the chrome paint Metalchrome. Innovative formulation, hybrid composition, 2-components-acrylic, a 20% catalysed.

Different sizes available. Hardener included in delivery.

More details

New product

37,19 €

- +

More info

The high quality topcoat CR2 has a hybrid formulation based on solvent and water, which fulfils the new rule VOC (about emission of products for production). Due to its composition and its balance the clear coat does not harm the fine, delicate pigments of chrome effect paints like METALCHROME.

It is a 2 components finish, catalysed a 20% (5 to 1), that dries fast. The topcoat is resistant to UV radiation, weathering and also quite scratch tolerant.

Once mixed, it should be used within 2 hours.

Different sizes available: 125ml / 250ml / 500ml / 1L

Corresponding hardener included in delivery.


For surfaces pre-treated with METALCHROME, it is recommended to proceed as follows:

Apply 2 layers of CR2. One first thin layer which serves for the adhesion, and then another thick, wet layer that protects against scratches and gives a glossy effect.

After 24 hrs. of air-drying still manipulable. After 72 hrs. totally dry and hard.

Can also be dried in the oven at 40º C during 2 hrs. Complete hardening after 24 hrs.

The catalyst is included.

Mixing proportion: 5 to 1 (20%)

Service life of the mixture: 2 hrs.

Customers who bought this product also bought:

5 other products in the same category:

No products

To be determined Shipping
0,00 € Tax
0,00 € Total

Check out