Chrome Topcoat CF4

2-component-topcoat that is particularly suitable for the chrome plating process with silver nitrate.

Available in 2 sizes: 1L and 0.5L

More details

New product
From

30,00 €

- +

 
More info

2-component-topcoat that is particularly suitable for the chrome plating process with silver nitrate.

Thanks to its chemical composition, it allows a direct adhesion on the silver and protects against abrasion, oxidation of the silver, ultraviolet rays and humidity.

 
CONTENT

SIZE A - 1L:

  • 1L of topcoat CF4
  • 200ml of catalyst CCF
  • 200ml of acrylic diluent HS, temperature-resistant DS

SIZE B - 0.5L:

  • 0.5L of topcoat CF4
  • 100ml of catalyst CCF
  • 100ml of acrylic diluent HS, temperature-resistant DS
 
RECOMMENDATIONS OF USE

Mixture and recommendations of use:

It is recommended to apply the topcoat at tempered temperatures of 20-25ºC. Only prepare as much mixture as for the incurring work needed at the following ratio:

100 pieces of topcoat CF4, per 2 pieces of catalyst CCF and 2 pieces of acrylic diluent DS.

Apply on the completely dry and clean surface. Apply a first, thin layer for the adhesion and let it dry for 5-10min. Afterwards apply a thicker, wet layer. If desired another layer can be put, the mixture should not accumulate though.

Let the finish air-dry: after 24 hours it can still be manipulated, after 72 hours completely hardened.

Drying in the oven: at 60ºC for 30min. Let it cool down afterwards. Complete hardening after 24 hours.

It is recommended to apply onto the topcoat CF4 the anti-scratch clear coat HS in order to have a high resistance against scratches and abrasion.

If you want to get a coloured chrome effect, simply apply a coloured coat (Candy) onto silver finish treated with the topcoat CF4.

Shelf life of the mixture: 24 hours

Theoretical performance 1L CF4: 10-12m2

Theoretical performance 0.5L CF4: 5-6m2

4 other products in the same category:

No products

To be determined Shipping
0,00 € Tax
0,00 € Total

Check out