Send to a friend
Send to a friend

Basecoat CB-7 for Chrome100%
The basecoat CB6 is a 2-component-solvent that was especially designed for the chrome plating process with silver nitrate.
Recipient :
Name of your friend ^* :
E-mail address of your friend ^* :
^* Required fields
or Cancel

Basecoat CB-7 for Chrome100%

The basecoat CB6 is a 2-component-solvent that was especially designed for the chrome plating process with silver nitrate.

More details

New product

More info
CONTENT
RECOMMENDATIONS FOR USE
Realizar una consulta sobre este producto

More info

The basecoat CB7 is a 2-component-solvent that was especially designed for the chrome plating process with silver nitrate.

Since it is a bakeable, it provides a very high hardening and resistance. It adapts perfectly and smooths the surface out what makes it perfect for the chrome plating. It provides a glossy coat that serves as a base for the silver chroming.

The CB7 basecoat gives a higher adhesion and resistance against humidity, cold and warm water to pieces.

CONTENT

FORMAT A - 0.5L

0.5L of basecoat CB5
75ml of catalyst CCB-5
150ml of special diluent for mixtures DS-5

FORMAT B - 1L:

1L of basecoat CB5
150ml of catalyst CCB-5
300ml of special diluent for mixtures DS-5

RECOMMENDATIONS FOR USE

Mixture and recommendations for use:

Only mix as much as you need for the incurring work volume at the following ratio:

100 pieces of the basecoat CB5 to 15 pieces of catalyst CCB-5 and 30 pieces of special diluent DS-5.

Apply on the completely clean and dry, if possible black or dark, surface. Apply a first, thin layer for the adhesion and let it dry for 5-10min. Afterwards apply a thicker, wet layer. If desired another layer can be put, the mixture should not accumulate though.

DRYING IN THE OVEN at 60ºC during 2-3 hours

Let it cool down for 24 hours (minimum to initiate the chrome plating process)

Shelf life of the mixture: 4-8 hours at 20ºC

Theoretical performance 1L CB5: 10-12m²

Theoretical performance 0.5L CB5: 5-6m²